Case Studies 4 min read |

Fueling a 65,000 sq ft 3PL Expansion with Repairable Bolted Racking

View down a wide aisle between tall back-to-back runs of orange and blue repairable bolted racking in a Guelph warehouse.
Type Of System

Back-to-Back Selective Racking

Location

Guelph, ON

Lynden Logistics operates a 3PL warehouse in Guelph, Ontario, where the building started out as three separate units. The company then expanded into the second and third units, taking over the whole building. That left them with 65,000 sq ft to put to work. They came to us needing an additional 3,000+ pallet positions to serve their existing customers while creating capacity for future growth and new business.

 

The system would need to deliver that capacity without becoming expensive to maintain over the years that follow, which pointed us toward repairable bolted racking.

Challenges Faced

 

Capacity for a Full Building

 

Taking over all three units gave Lynden a single 65,000 sq ft warehouse. The additional 3,000+ pallet positions therefore had to fit within that footprint. The capacity needed to cover the customers they were already serving while leaving room for the new business they were taking on.

Long-Term Ownership Costs

 

Freight lands as a cost at the start of a racking project, and maintenance accumulates over the years that follow. Welded frames concentrate that second cost, because damage to one component usually means replacing the entire frame rather than the part that failed.

Solutions

 

Repairable Bolted Racking from the Knockdown Line

 

We therefore specified repairable bolted racking from our Knockdown product line. The choice of bolted over welded was deliberate: bolted frames ship at a lower freight cost, and their components can be repaired or replaced individually when damaged. That means the customer replaces a part rather than a whole frame. Across a system of this size, that difference accumulates over the service life.

 

Wide Aisle Back-to-Back Selective Layout

 

Rather than design the layout in isolation, we worked through it directly with Lynden. That produced a wide aisle, back-to-back selective configuration. Because selective racking gives a lift truck direct access to every pallet position, it suits an operation holding inventory on behalf of several customers. Working it out together also kept the design moving, and installation finished on schedule.

 

Permitting Assistance

 

In addition to the design work, we assisted Lynden throughout the permitting process. As a result, they secured approval for the racking system and the project stayed on track.

Results & Impact

 

In the end, the finished system gives Lynden 3,360 pallet positions across roughly 20,000 sq ft of racking. It sits inside their 65,000 sq ft warehouse and stands 336 inches tall. That capacity therefore covers the customers they were already serving, while also leaving room for new business.

 

For Lynden, the repairable bolted racking also keeps the cost of owning the system predictable. Damage is handled at the component level rather than through full frame replacement. That holds down long-term ownership costs over the service life of the racking system.

 

We have completed numerous projects with Lynden over the past five years. This one reinforced how much of a racking system’s cost is settled at specification rather than at installation.

 

Planning a Warehouse Expansion

 

For operations planning an expansion, repairable bolted racking is worth weighing alongside the pallet count. Both the capacity and the repair path are decided at specification, before any steel is ordered. Our team is ready to design, engineer, manufacture, and install a system built around your footprint and how you intend to maintain it. Contact our team to discuss what your facility can hold.